GROUP OF COMPANIES
 
 

 

 


IZOMETÒ Epoxy Steel Primer

 

 

HB0110

 

Anti-Corrosive Primer For Steel (Solvent Included)

 

 

DATA SHEET

 
 
 

 

 

 

 


    DESCRIPTION

     IZOMETÒ Epoxy Steel Primer has excellent mechanical facilities so it can afford perfect out standing protection against corrosion and any other atmospheric or environmental conditions.   

     IZOMETÒ Epoxy Steel Primer is ideal to protect steel structures such as marine structures, petrochemical plants, bridges any structure under affect of corrosive attacks. And also it’s suitable to be used in repairing of pre-coated steel elements.

     IZOMETÒ Epoxy Steel Primer is a two component coating system which is factory weighed and packaged  so ready for site usage and is a blend of special epoxy resins.

 

SPECIAL FEATURES

 

·       Solvent containing

·       Positive bond to steel

·       Well adhesion

·       Rust inhibiting

·       Hard flexible coating

·       If needed diluted with solvents

·       Excellent resistance to humidity, water and dilute chemicals

 

    PHYSICAL PROPERTIES

 

Property

10°C

20°C

30°C

Pot life

15 min

11 min

8 min

Initial hardness

8 Hr

4 Hr

2 Hr

Full cure

7 Days at room

temperature

 

 

INSTRUCTIONS FOR USE

·       PREPARATION

     Steel structures should be free from rust, oil or any foreign materials. If rust isn’t so much manual cleaning could made but for the best result sand or grit blast the steel surface according to the Swedish Standard SA 2½.

·       MIXING COMPONENTS

     IZOMETÒ Epoxy Steel Primer is a three component material and supplied in pre-weighed packs in exact proportions. If possible mix all the components with a mixer running at less than 400 rpm to avoid trapping air in material.

 

·       APPLICATION

     IZOMETÒ Epoxy Steel Primer can be applied by airless spray, roller or brush. During application be careful not to leave pinholes or breaks in the coating.

     For the best adhesion between layers also be careful about application times (initial hardness time) between the two layer. System must be made as wet-on-wet. If couldn’t blast or emery existing layer.

 

    CURING

     Application can be made between 5°C  to 30°C. If application in over temperature places  call our technical service for help.

     Full cure takes 7 days.

 

    CLEANING DOWN

     After the application all hand tools and other surfaces effected from uncured epoxy resin should clean with Izomet® Cleaning fluid.

 

    COVERAGE

     IZOMET® Epoxy Steel Primer is supplied  in 5 kg pre-weighed packages. Usage is about 135-140 g/m² and gives approximately 100-110 microns wet and 35-40 microns dry thickness.

 

    STORAGE

     All materials should be kept  in their tightly closed own packs. Under these conditions shelf life is minimum 12 months at normal temperatures.

 

    CAUTION

     Uncured epoxy resin kept away from mouth, eyes, food or drink.

     Empty tins must not be used even cleaned by suitable methods.

     During application or handling uncured epoxy resins, wear gloves or barrier creams.

     In case of contact with skin immediately clean with warm water and soap.

     Avoid inhaling vapor.

     Do not use below 5°C.

     No other materials should be added.

 

    SUPPLY

 

IZOMAS GROUP OF COMPANIES

Headquarters

Cumhuriyet mah. Fatih cad. No:4

Kartal - Istanbul - TURKEY

Tel: +90 216 451 48 48 (PBX)

Fax: +90 216 309 74 57

http:\\www.izomas.com.tr

e-mail: izomas@izomas.com.tr

 

Izomet is a IZOMAS trade mark.

This material is manufactured in Turkey using raw material from and under the supervision of Shell Chemicals.

 

The information that given in this leaflet is, prepared best of our current knowledge and given in good faith, but our recommendations are made without guarantee because of   the conditions of uses are beyond our control. Buyers and applicators should prepare their own instructions for their own conditions and requirements.